
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X700-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 700mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X700-40-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the end position. With a nominal 700 mm stroke and a 40 mm adjustment range, it provides a usable travel window of 660 to 700 mm. This specific SKU includes a magnet for position sensing and utilizes a carbon steel rod with PT tapered ports.
The extruded aluminum barrel includes sensor grooves on both sides, supporting AirTAC CMSE reed and DMSE electronic solid-state switches. The rear adjuster functions purely as a travel stop to dial in the exact retract distance during commissioning, meaning it will not hold the load without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X700-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position within the 660-700 mm window during machine commissioning to perfect product hand-offs without swapping hardware.
Quickly adapt the cylinder's stroke on production lines running multiple package sizes by turning the rear adjustment screw to shift the end point.
Execute extended 700 mm assembly or press operations where precise end-of-stroke positioning is critical and minor mechanical variations must be trimmed out.
Choose this adjustable-stroke model over a fixed SAI cylinder when you need to trim the retract distance on the fly without adding external stops. For higher force demands, a 50 mm bore provides 982 N. Because the total travel is 700 mm, the 16 mm rod and M12x1.25 thread will be subjected to increased bending moments; an external guide is strongly recommended to prevent excessive side-load wear.
When matching this cylinder for an ISO 15552 replacement, verify the 40 mm bore, 700 mm stroke, 40 mm adjustment, PT port threads, and the -S magnet option. SAIJ supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. Remember that the rear adjuster and air cushions only decelerate the travel end; for true load-holding without live air, consider the SAIL or BSAI series.
Quick checklist
The rear adjuster acts as a mechanical stop that lets you shorten the effective stroke by up to 40 mm. This creates a usable travel window between 660 mm and 700 mm, allowing fine-tuning of the end position without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.