
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X700-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 700mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X700-50 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel within a 650-700 mm window. The carbon steel piston rod features an M12x1.25 thread, offering a solid interface for your custom mounting attachments.
This model uses a PT tapered G1/4 port and includes variable air cushions at both ends to manage kinetic energy over the long 700 mm travel. The extruded aluminum barrel incorporates sensor grooves on both sides for straightforward position feedback. Keep in mind the rear adjuster acts purely as a travel stop for end-position tuning, not a load-holding lock; if you need to maintain position without live air pressure, consider an external rod lock or the AirTAC SAIL series.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X700-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance within the 650-700 mm window when switching product sizes on a packaging line, avoiding mechanical cylinder swaps.
Use the rear adjuster screw to fine-tune the final end-of-stroke position during commissioning, ensuring precise mechanical alignment without external stoppers.
Adjust the travel end-point to modify the stroke of a diverter arm on a conveyor, accommodating different package dimensions on the fly.
Choose this 40 mm bore adjustable-stroke cylinder when your machine setup requires precise end-position calibration during commissioning or product changeovers, avoiding the need to physically swap out a fixed-stroke SAI cylinder. If your application demands less force, stepping down to a 32 mm bore yields 563 N at 0.7 MPa, whereas stepping up to a 50 mm bore provides 1374 N for heavier payloads. Because the 700 mm stroke is relatively long, the 16 mm rod will experience greater leverage forces, so an external guide is recommended to prevent excessive side-loading. To replace an ISO 15552 cylinder, match the 40 mm bore, 700 mm stroke, 50 mm adjustment, PT G1/4 port, and your required mounting from the SAIJ subset (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Quick checklist
The rear adjuster acts as a mechanical stop that lets you shorten the 700 mm nominal stroke by up to 50 mm, providing a usable travel window of 650 to 700 mm for precise end-position tuning.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.