verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X700-75

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X700-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 700mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke700 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$129.10 $136.60Save 5% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X700-75

The AirTAC SAIJ40X700-75 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 625 to 700 mm usable travel window by allowing you to dial back the nominal 700 mm stroke up to 75 mm.

This model uses a PT tapered G1/4 port and a 16 mm carbon steel rod with an M12x1.25 thread. It includes adjustable air cushions at both ends to manage kinetic energy over the long travel. The extruded aluminum barrel features sensor grooves on both sides, allowing you to add CMSE reed or DMSE electronic sensors if position feedback is needed later.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X700-75 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X700-75
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke700 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X700-75

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×700Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X700-75 Is Used

tune

Product Changeovers

Dial in the exact end-stop between 625 and 700 mm during product size transitions without adding external mechanical stops.

settings_input_component

Commissioning Setup

Fine-tune the retract position during initial machine commissioning to perfect the timing and location of tooling.

conveyor_belt

Variable Discharge

Adjust the push-off distance on a conveyor diverter to accommodate different package lengths on the fly.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X700-75 the Right Cylinder?

Choose this 40 mm bore adjustable cylinder when your machine setup requires fine end-position tuning during commissioning or product changeover without swapping physical hardware. Because the nominal stroke is 700 mm, the 16 mm rod needs external guidance to prevent excessive side-loading and premature seal wear. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air pressure; for true load-holding, consider an external pilot-operated check valve or the SAIL series. It mounts via Basic, FA, LB, TC, FTC, TCM1, or TCM2 interfaces.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X700-75 FAQ

The rear adjuster screw lets you shorten the effective travel from the 700 mm nominal stroke down to 625 mm. It acts as a mechanical stop to set the end position and does not lock the load without continuous air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X700-75

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X700-75 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.