
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X75-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 75mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X75-10 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. By turning the rear screw, you achieve a usable travel window of 65-75mm, allowing precise end-position tuning without adding external stops.
This 40mm bore actuator features a 16mm carbon steel rod and adjustable air cushions at both ends. It supports speeds of 30-800mm/s. The rear mechanism acts purely as a travel stop for commissioning flexibility, not as a load-holding lock; for position retention without live air, consider an external rod lock or the SAIL series.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X75-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 65-75mm travel window during initial setup to dial in exact contact points without machining new hard stops.
Quickly adjust the retract position by up to 10mm on packaging lines when handling slightly different product sizes.
Use the rear stopper screw to set precise end-of-stroke positions for delicate pressing or clamping tasks.
If your setup requires less force, stepping down to a 32mm bore yields 402N; stepping up to a 50mm bore provides 982N. The adjustable 10mm window is perfect for product changeovers where fixed-stroke SAI cylinders would require physical shimming.
To achieve exact ISO 15552 dimensional interchangeability, match the 40mm bore, 75mm nominal stroke, 10mm adjustment range, PT port thread, and your desired mounting style. Supported mounts include Basic, FA, LB, TC, FTC, TCM1, and TCM2. Because the stroke is under 300mm, side-load stress is minimal, though external guides are still recommended for heavy lateral loads.
Quick checklist
At 0.7 MPa, the push force increases to 879N.
The rear adjuster screw allows you to trim the effective travel back by up to 10mm from the 75mm nominal stroke, creating a 65-75mm usable window. It functions as a mechanical stop for position tuning and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.