
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X75-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 75mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X75-10-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a usable travel window of 65 to 75 mm, allowing you to dial back the nominal 75 mm stroke by up to 10 mm during machine commissioning.
This variant features a standard carbon steel rod with PT tapered port threading (G1/4). The built-in -S magnet supports position sensing using AirTAC CMSE reed or DMSE electronic solid-state switches mounted into the dual-side sensor grooves. The rear adjustment screw functions purely as a mechanical stop to set the retract end-position; it does not hold the load without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X75-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position within a 65-75 mm window during machine setup to perfect part seating without machining external spacers.
Quickly adjust the stroke end by up to 10 mm on the fly to accommodate slightly different package sizes on a packaging line.
Leverage the -S magnet and dual sensor grooves to mount CMSE or DMSE switches for precise mid-stroke detection of moving assemblies.
If your setup demands less force, stepping down to a 32 mm bore yields 402 N, while moving up to a 50 mm bore provides 982 N. The adjustable 10 mm window is ideal for product changeovers.
For an exact ISO 15552 dimensional replacement, match the 40 mm bore, 75 mm nominal stroke, 10 mm adjustment range, G1/4 PT port, and the -S magnet option. Mounting choices include Basic, FA, LB, TC, FTC, TCM1, and TCM2. Remember that the rear adjuster only trims travel distance; for fail-safe load holding without live air, consider the SAIL or BSAI series instead.
Quick checklist
At 0.7 MPa, the push force increases to 879 N.
The rear mechanical screw acts as a stopper, allowing you to shorten the effective stroke from 75 mm down to 65 mm. This provides a 10 mm tuning window for precise end-position calibration without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.