
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X75-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 75mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X75-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster, designed to fine-tune end positions during commissioning. It provides a usable travel window of 55 to 75 mm, allowing you to dial back the nominal 75 mm stroke by up to 20 mm without adding external stops.
This model uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) that omits the FB, CA, CB, and CR options. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic sensors. The rear adjuster acts purely as a travel stop for deceleration, meaning it will not hold a load without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X75-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 55-75 mm travel during initial commissioning to perfect positioning without machining custom spacers.
Quickly adjust the rear stopper up to 20 mm to accommodate different part sizes on the same assembly line.
Use the fine-tuning screw to set precise retract endpoints for delicate pressing or feeding tasks.
The adjustable 55-75 mm travel window is ideal for product changeovers on a line, letting you set exact end-stops on the fly instead of swapping a fixed-stroke SAI cylinder. If your process needs to hold a load mechanically without continuous air, you must add an external rod lock or look at the SAIL or BSAI series, as the SAIJ adjuster is not a brake.
To match this ISO 15552 cylinder for a direct replacement, verify the 40 mm bore, 75 mm stroke, 20 mm adjustment range, PT tapered port thread, and the required mounting accessory. Because the stroke is under 300 mm, side-loading is less severe, but the 16 mm rod and M12x1.25 thread still require guided tooling if pushing off-center loads.
Quick checklist
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the effective stroke from 75 mm down to a minimum of 55 mm. It only sets the travel end and provides deceleration; it does not lock or hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.