
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X75-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 75mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X75-20-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. By turning the rear stopper screw, you can trim the effective travel, creating a precise 55-75 mm usable stroke window for exact end-position tuning.
This adjustable-stroke design eliminates the need to swap cylinders or bolt on external stops during machine changeovers. It includes a built-in magnet for CMSE reed and DMSE electronic sensors, and uses variable air cushions at both ends to decelerate the load. The rear adjuster acts purely as a travel stop and does not hold the load without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X75-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 55-75 mm travel window during product size changes without swapping the cylinder or adding external stops.
Set precise retract positions at commissioning using the rear adjuster screw for components requiring strict positional tolerance.
The PT tapered port and G1/4 thread interface match standard SAI pneumatic layouts. To replace an ISO 15552 cylinder, match the 75mm stroke, 20mm adjustment, Basic/FA/LB/TC/FTC/TCM1/TCM2 mounting, and the -S magnet requirement.
Quick checklist
The rear adjuster screw lets you shorten the 75mm nominal stroke by up to 20mm, providing a usable travel window of 55-75mm. The adjuster acts as a travel stop to decelerate the load, but it does not lock or hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.