
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X75-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 75mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X75-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel back by up to 30 mm. This yields a highly flexible 45-75 mm usable travel window, letting you dial in the exact end position at commissioning without swapping out the barrel or adding bulky external stops.
Built with a standard carbon steel rod and M12x1.25 rod threading, this 40 mm bore profile cylinder handles side loads better than smaller variants while utilizing a PT tapered port thread for a reliable pneumatic seal. The extruded aluminum barrel includes sensor grooves on both sides for straightforward position feedback. It retains the standard variable air cushion at both ends to decelerate the moving load, but the rear mechanical stopper is strictly for setting travel limits, not for holding the load without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X75-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 45-75 mm travel window during machine commissioning to perfect positioning without machining external stopper blocks.
Quickly adapt the cylinder's retract end-stop on the fly when running a new product size batch on a packaging line.
Choose this SAIJ40X75-30 when your machine setup requires variable end-stops or frequent product-size changeovers that would otherwise demand physically swapping cylinders. Because the nominal 75 mm stroke is relatively short, external side-load guides are less critical here than on longer strokes, though alignment should still be maintained.
This adjustable-stroke model is dimensionally interchangeable per ISO 15552 mounting-interface dimensions. To match this exact configuration, specify a 40 mm bore, 75 mm nominal stroke, 30 mm adjustment range, PT port threads, and the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Note that this cylinder does not feature a magnet (-S), so it will not work with AirTAC CMSE or DMSE sensors without modification. For load-holding requirements without live air pressure, consider the SAIL or BSAI series instead.
AirtacDistr lists every SAIJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-saij40-adjustable-cylinder
Quick checklist
The rear adjuster screw acts as a mechanical stop that lets you shorten the effective stroke by up to 30 mm. This creates a usable travel window of 45-75 mm, allowing you to fine-tune the end position without changing the cylinder or adding external stops.
At the maximum operating pressure of 1.0 MPa, it can deliver up to 128 kgf.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.