
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X75-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 75mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X75-30-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. The built-in rear stopper provides a usable travel window of 45 to 75 mm, allowing you to dial back the nominal stroke by up to 30 mm during machine commissioning.
This adjustable model includes a magnetic piston for position detection, working seamlessly with AirTAC CMSE reed and DMSE solid-state sensors housed in the dual-side barrel grooves. It utilizes a PT tapered port thread (G1/4) and variable air cushions at both ends to manage end-of-stroke deceleration. The rear adjuster functions purely as a travel stop, meaning it will not hold a load without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X75-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly modify the retract end-position by up to 30mm when switching between product sizes on a packaging line, avoiding physical hardware replacements.
Fine-tune the 45-75mm travel window during initial commissioning to perfectly time the 16mm rod extension against a workpiece.
Leverage the magnetic piston with DMSE electronic sensors to confirm adjustable end-positions in automated assembly fixtures.
Choose this 40mm bore unit when your setup requires variable end-stops or frequent product changeovers, eliminating the need to physically swap cylinders or bolt on external stops. For load-holding requirements without continuous air pressure, this cylinder is insufficient, and you should explore the SAIL pneumatic lock or BSAI clamp-lock series instead.
As a dimensionally interchangeable ISO 15552 cylinder, it matches standard SAI footprint dimensions. The exact replacement configuration is a 40mm bore, 75mm stroke, 30mm adjustment, PT port thread, and a magnetic piston (-S). It supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). Operating speed ranges from 30 to 800 mm/s.
Quick checklist
It features a rear adjusting screw that acts as a mechanical stop, allowing you to shorten the effective travel from 75mm down to 45mm. This provides a 30mm adjustable window for fine-tuning the end position without changing the cylinder itself.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.