
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X75-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 75mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X75-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel down to a 35-75 mm window.
Because the rear screw acts purely as a mechanical stop to set the end position, it does not hold the load without live air pressure. For load-holding without continuous air, consider an external rod lock or related types like the SAIL or BSAI. This profile cylinder supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X75-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 35 to 75 mm end-position during product size changes without swapping hardware.
Use the rear mechanical stopper to precisely set the retract distance for delicate assembly operations.
Adjust the clamping travel window on the fly to accommodate varying workpiece thicknesses.
The adjustable stroke is ideal for product changeovers, letting you fine-tune the 35-75 mm travel at commissioning without adding external stops. Since the standard configuration lacks a magnet, add an -S suffix if you require CMSE reed or DMSE electronic sensors for position feedback.
When replacing an ISO 15552 cylinder, match the 40 mm bore, 75 mm nominal stroke, 40 mm adjustment range, PT port thread, and your specific mounting choice. The 16 mm rod and M12x1.25 thread handle moderate side loads well, though any stroke over 300 mm would require external guiding.
AirtacDistr lists every SAIJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-saij40-adjustable-cylinder
Quick checklist
It operates efficiently at speeds between 30 and 800 mm/s.
The rear adjuster screw lets you shorten the 75 mm nominal stroke by up to 40 mm, creating a usable travel window of 35 to 75 mm. This stopper sets the end position but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.