
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X75-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 75mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X75-50 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that permits fine end-position tuning. With a nominal 75 mm stroke and a 50 mm adjustment range, it provides a usable travel window of 25 to 75 mm, enabling rapid product changeovers without swapping hardware.
The rear adjuster functions strictly as a mechanical stop to set deceleration, not as a load-holding lock; maintaining position requires live air pressure. This extruded aluminum barrel unit supports a reduced mounting subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR brackets. Sensor grooves on both sides accommodate CMSE reed and DMSE electronic switches if a magnet is specified later.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X75-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance between 25 and 75 mm during machine commissioning to accommodate new part dimensions without machining custom spacers.
Quickly reset the stroke end-position on a packaging line when switching between different product lengths, minimizing downtime between runs.
The 50 mm adjustment range is ideal for varying end-stops during machine setup. If your process needs less force, stepping down to a 32 mm bore yields 402 N; for heavier loads, a 50 mm bore provides 982 N. Unlike a fixed-stroke SAI cylinder, this adjustable model eliminates the need for external stopper blocks during commissioning.
For exact ISO 15552 replacement matching, verify the 40 mm bore, 75 mm nominal stroke, PT tapered port threads, and carbon steel rod material. Because the adjustment mechanism acts on the retract end, ensure your layout accommodates the rear hardware. As with all pneumatic cylinders, it cannot hold a load without continuous air pressure—if load-holding is required, consider the SAIL or BSAI series.
Quick checklist
At the maximum operating pressure of 1.0 MPa, it can deliver up to 128 kgf.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the effective stroke from its 75 mm nominal length down to as little as 25 mm. This provides a 25-75 mm usable travel window for fine-tuning end positions at commissioning without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.