
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X75-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 75mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X75-50-S is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 75 mm stroke that can be fine-tuned backward, creating a highly flexible 25-75 mm usable travel window.
Because this SKU includes the -S magnet option, it is fully compatible with AirTAC CMSE reed and DMSE solid-state sensors, which mount directly into the dual-side sensor grooves on the extruded aluminum barrel. The rear adjuster acts purely as a mechanical stop to set the retraction end position and does not hold the load without live air pressure. It uses a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR options.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X75-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retraction point between 25 and 75 mm during commissioning without swapping out the cylinder or adding external physical stops.
Quickly adapt machinery to different product lengths on a single line by adjusting the rear mechanical stopper to the required travel distance.
Leverage the integrated -S magnet with CMSE or DMSE sensors to precisely confirm the adjusted end position during machine commissioning.
The 50 mm adjustment range on a 75 mm stroke is specifically selected for applications requiring extreme variability in end-stop positioning during machine setup or product changeover, rather than relying on a fixed-stroke SAI cylinder. Remember that the rear adjuster is a travel stop, not a lock; if the application requires true load-holding without continuous air pressure, consider the SAIL or BSAI series instead. This cylinder is dimensionally interchangeable per ISO 15552.
Quick checklist
If pressure is increased to 0.7 MPa, the push force reaches 879 N.
The rear adjuster screw allows you to shorten the effective stroke by up to 50 mm. This creates a usable travel window ranging from 25 mm to 75 mm, letting you fine-tune the end position without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.