verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X75-75

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X75-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 75mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke75 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$68.36 $75.86Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X75-75

The AirTAC SAIJ40X75-75 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 0-75 mm, allowing you to dial back the 75 mm nominal stroke precisely during commissioning without swapping out the physical unit.

It features a carbon steel piston rod with an M12x1.25 thread, offering robust resistance to side loads. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE or DMSE switches, and the PT tapered port ensures a tight, reliable pneumatic connection.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X75-75 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X75-75
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke75 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X75-75

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×75Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X75-75 Is Used

tune

Machine Changeover

Quickly reposition the end-stop by up to 75 mm when switching between product sizes on a shared production line.

settings_input_component

Actuator Setup

Fine-tune the exact end-of-stroke position during initial commissioning without adding bulky external stopper blocks.

precision_manufacturing

Variable End Stops

Dial in the precise clamping or positioning distance for assemblies that require slight travel variations between runs.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X75-75 the Right Cylinder?

Select this adjustable model over a fixed-stroke SAI when your application requires variable end-stops or frequent product changeovers that demand on-the-fly position tuning.

Because the 75 mm stroke is relatively short, an external guide rail is not strictly required, but the M12x1.25 rod still handles side loads well. Remember that the rear adjuster acts only as a mechanical stop to set the travel end; it does not hold the load without continuous live air. For load-holding requirements without air pressure, consider an AirTAC SAIL or BSAI cylinder. To replace an ISO 15552 cylinder, match the 40 mm bore, 75 mm stroke, PT port, and the Basic, FA, LB, TC, FTC, TCM1, or TCM2 mounting set.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X75-75 FAQ

The rear adjusting screw acts as a mechanical stopper, allowing you to shorten the effective travel from its nominal 75 mm down to 0 mm. It sets the end position but does not lock the load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X75-75

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X75-75 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.