
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X750-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 750mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X750-75 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel between 675 and 750 mm.
Instead of fabricating external stopper blocks during product changeovers, the integrated rear screw lets you dial in the exact retract position on the fly. The extruded aluminum barrel includes dual sensor grooves, and while this standard configuration omits a magnet, adding an -S suffix enables compatibility with CMSE reed and DMSE electronic solid-state switches.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X750-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 750 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×750 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the retract distance within the 675-750 mm window to accommodate different material lengths without physically remounting the actuator.
Quickly adjust the rear stopper on packaging conveyors when switching between box sizes, minimizing machine downtime between production runs.
Utilize the 750 mm travel for reaching across wide assembly fixtures, fine-tuning the final approach position during equipment commissioning.
The 75 mm adjustment window is ideal for production lines running mixed product sizes, allowing rapid end-position tuning without swapping out the entire cylinder for a fixed-stroke SAI variant.
Because the 750 mm stroke is substantial, the 16 mm rod requires external guide rails to prevent excessive side-loading and binding. Furthermore, the rear adjuster acts strictly as a travel stop and does not hold the load without live air; for positive load-holding without pneumatic pressure, consider an AirTAC SAIL or BSAI cylinder. This SAIJ model supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, omitting FB, CA, CB, and CR options.
Quick checklist
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the 750 mm nominal stroke by up to 75 mm, creating a usable travel window of 675 to 750 mm. It only sets the end position and does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.