
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X80-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 80mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X80-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the travel window down to 70-80 mm from the 80 mm nominal stroke. The extruded aluminum barrel includes sensor grooves on both sides for straightforward position feedback.
This adjustable model is ideal for applications requiring exact end-position calibration during commissioning without swapping hardware. It features variable air cushions at both ends and operates at speeds from 30-800 mm/s. The rear adjuster acts purely as a travel stop to set the retract position, so it does not hold the load dynamically without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X80-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 70-80 mm travel window during product size changeovers without physically replacing the cylinder or adding external stopper blocks.
Use the 10 mm rear adjuster to fine-tune the exact retract end position during machine commissioning, ensuring precise mechanical alignment.
Set variable end stops on automated assembly lines where slight stroke variations are needed for different workpiece geometries.
Choose this 40 mm bore when you need precise retract tuning that a fixed-stroke SAI cannot provide, avoiding the need to bolt on external stops. Because the 16 mm rod and M12x1.25 thread handle moderate side loads well, this cylinder suits standard in-plane movements.
For dimensionally interchangeable ISO 15552 replacements, match the 40 mm bore, 80 mm stroke, 10 mm adjustment range, PT G1/4 port, and carbon steel rod. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2. Since this cylinder lacks a magnet, use external physical stops or sensors if position detection is required, and note that load-holding without live air requires a SAIL or BSAI series lock.
Quick checklist
The rear adjuster acts as an external stopper that lets you shorten the effective stroke by up to 10 mm, creating a 70-80 mm usable travel window. It sets the end position but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.