verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X80-20

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X80-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 80mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke80 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$70.48 $77.98Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X80-20

The AirTAC SAIJ40X80-20 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. By integrating an external adjusting screw, this model provides a usable travel window of 60 to 80 mm, allowing you to trim the effective stroke by up to 20 mm during commissioning without swapping the cylinder.

This 40mm bore profile cylinder features an extruded aluminum barrel with sensor grooves on both sides, accepting CMSE reed or DMSE electronic switches if a magnet is added later. The standard carbon steel rod with an M12x1.25 thread offers robust resistance to side loading. Mounting options include the reduced SAIJ set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR brackets.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X80-20 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X80-20
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke80 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X80-20

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×80Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X80-20 Is Used

tune

End-Stop Fine Tuning

Dial in the exact 60 to 80 mm retraction point during machine commissioning to perfect part ejection without machining new hard stops.

settings_input_component

Product Size Changeover

Quickly adjust the stroke by up to 20 mm on packaging lines running slightly different carton lengths, minimizing downtime between batches.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X80-20 the Right Cylinder?

The adjustable 60-80 mm travel window is ideal for product changeovers or fine-tuning end positions on the fly, eliminating the need to bolt on external stops or buy multiple fixed-stroke SAI cylinders. Remember that the rear adjuster acts strictly as a travel stop and does not hold the load without live air; for dead-load holding, select an SAIL or BSAI cylinder. To match this ISO 15552 replacement exactly, specify the 40mm bore, 80mm stroke, 20mm adjustment, PT port, desired mounting bracket, and magnet (-S) if sensors are required.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X80-20 FAQ

If pressure increases to 0.7 MPa, the push force rises to 879N.

The rear adjuster screw acts as a mechanical stop, allowing you to shorten the nominal 80mm stroke by up to 20mm. This creates a usable travel window of 60 to 80mm for fine-tuning end positions without replacing the cylinder.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X80-20

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X80-20 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.