
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X80-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 80mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
It features a carbon steel piston rod and a PT tapered port. Because it carries the -20 adjustment code, you can dial back the nominal 80mm stroke by up to 20mm, creating a precise 60-80mm usable travel window for exact end-position tuning.
This rear adjuster acts purely as a mechanical stop to set the retract position and is not a lock, meaning the cylinder cannot hold a load without live air pressure. Equipped with a magnet for position sensing, it integrates seamlessly with AirTAC CMSE reed and DMSE electronic sensors fitted into the dual-side barrel grooves. It supports a speed range of 30-800 mm/s and uses the standard SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting FB and rear pivot options.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X80-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract stop during machine commissioning without installing external physical stops or changing the cylinder.
Quickly adjust the 60-80mm travel window to accommodate slight variations in product sizes on a single production line.
If your setup needs less force, the 32mm bore offers 402N at 0.5 MPa; for heavier loads, stepping up to the 50mm bore provides 982N. The adjustable stroke is ideal for machine changeovers, allowing you to fine-tune the 60-80mm travel window without swapping cylinders or adding external stops. For load-holding without continuous air pressure, consider the SAIL or BSAI series instead, as this adjuster only decelerates the travel end. To match this ISO 15552 replacement, verify the 40mm bore, 80mm stroke, 20mm adjustment, PT port, and -S magnet.
Quick checklist
At 0.9 MPa, the push force increases to 1130N.
The rear adjuster screw lets you shorten the nominal 80mm stroke by up to 20mm, creating a 60-80mm usable travel window. It functions as a travel stop and does not lock or hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.