
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X80-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 80mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X80-40-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 80 mm stroke that can be dialed back by up to 40 mm, yielding a highly flexible 40-80 mm usable travel window for precise end-position tuning.
This variant includes a standard carbon steel piston rod, PT tapered port threads (G1/4), and a built-in magnet (-S) for position sensing. The extruded aluminum barrel features sensor grooves on both sides, allowing you to mount AirTAC CMSE reed or DMSE electronic solid-state switches without extra brackets. The rear adjuster acts purely as a mechanical stop to set the retraction end-point, meaning it does not lock or hold the load without continuous live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X80-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the stroke from 40 to 80 mm during format changes on packaging lines, allowing rapid adaptation to different carton sizes without changing cylinders.
Fine-tune the retraction end-position at commissioning to clear mechanical obstructions, using the rear stopper to set exact travel limits.
Accommodate multiple stopping positions in automated test fixtures by adjusting the travel window on the fly to meet varying part dimensions.
Choose this 40 mm bore adjustable cylinder when your application requires variable end-stops or frequent machine changeovers between product sizes, eliminating the need to physically swap out a fixed-stroke SAI cylinder.
Because this SAIJ model uses a rear mechanical stopper rather than a locking device, it cannot hold a load in place without live air pressure. For fail-safe load holding, consider the SAIL pneumatic lock or BSAI clamp-lock series. When replacing an ISO 15552 cylinder, verify the 40 mm bore, 80 mm stroke, 40 mm adjustment range, PT port thread, and the -S magnet. The 16 mm diameter rod and M12x1.25 thread handle moderate side loads well, though any stroke exceeding 300 mm would require an external guide.
Quick checklist
The cylinder has a nominal 80 mm stroke, but the rear adjuster allows you to shorten the effective travel by up to 40 mm. This creates a 40-80 mm usable travel window, which can be fine-tuned during commissioning or product changeovers without adding external stops.
At the maximum rated pressure of 1.0 MPa, it can deliver up to 128 kgf.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.