
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X80-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 80mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X80-75 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a highly flexible 5 to 80 mm usable travel window from its 80 mm nominal stroke. The extruded aluminum barrel includes sensor grooves on both sides for straightforward positioning feedback.
This adjustable-stroke design allows operators to fine-tune end positions at commissioning without swapping out the entire unit. The rear adjustment mechanism acts purely as a travel stop to set deceleration limits, meaning it cannot hold a load without live air pressure. For applications requiring positive load-holding, AirTAC SAIL or BSAI series cylinders are recommended instead.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X80-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact travel distance between 5 and 80 mm during machine commissioning to accommodate multiple product sizes without changing hardware.
Quickly adjust the retract stopper on a packaging conveyor when switching between different package lengths on the same line.
The 75 mm adjustment range is ideal for product changeovers on a packaging line, providing variable end-stops without adding external physical stops. To replace an ISO 15552 cylinder, match the 40 mm bore, 80 mm stroke, PT G1/4 port, and the specific 75 mm adjustment code. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Since the nominal stroke is under 300 mm, side-loading risks are moderate, but the 16 mm rod diameter and M12x1.25 thread still require external guiding if the load is heavy or off-center. The rear adjuster functions as a hard stop, not a locking device, so the cylinder relies on live air to maintain position. If the machine cycle requires the rod to stay locked during air loss, an external rod lock or a BSAI clamp-lock cylinder is necessary.
Quick checklist
The rear adjuster screw lets you mechanically shorten the 80 mm nominal stroke by up to 75 mm, providing an effective travel window of 5 to 80 mm. It acts as a physical stop to set the end position and does not lock the load without live air pressure.
At 0.7 MPa, the push force increases to 879 N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.