
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X80-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 80mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X80-75-S is a double-acting ISO 15552 profile cylinder with a rear stroke adjuster. It provides a nominal 80 mm stroke but features an external stopper screw that allows you to trim the effective travel back by up to 75 mm, creating a wide 5-80 mm usable stroke window for highly variable end positions.
This unit includes a standard carbon steel rod and PT tapered ports. The -S magnet option enables position sensing with AirTAC CMSE reed or DMSE solid-state switches fitted into the dual-side sensor grooves. The rear adjuster acts purely as a mechanical stop for end-position tuning and does not hold the load without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X80-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retraction distance for a dosing head across a 5-80 mm window during product changeovers.
Fine-tune the end stop during commissioning without machining new spacer blocks or swapping the cylinder.
Accommodate varying part widths on a machining line by adjusting the rear stopper to the exact required position.
Select this 40 mm bore cylinder when your application requires frequent end-position changes across a 5-80 mm window without swapping physical components. If your machine needs true load-holding without continuous air pressure, this adjustable stop is insufficient; you should use an SAIL air-released lock, a BSAI clamp-lock, or an external pilot-operated check valve instead.
For ISO 15552 interchangeability, match the 40 mm bore, 80 mm nominal stroke, 75 mm adjustment range, PT port threads, and the -S magnet. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR brackets. Because the stroke is short, side-load risks are minimal, but always guide external loads to prevent rod binding.
Quick checklist
At 0.7 MPa the push force increases to 879 N.
The rear stopper screw lets you mechanically shorten the 80 mm nominal stroke by up to 75 mm, yielding a usable 5-80 mm travel window. The adjuster is a stop, not a lock, so live air is required to hold the load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.