
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X800-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 800mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X800-10 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a 790 to 800 mm usable travel window, allowing you to trim up to 10 mm off the nominal stroke during commissioning without adding external stops.
This extruded aluminum barrel design includes sensor grooves on both sides for flexible switch mounting. The rear adjuster functions strictly as a travel stop to set the retraction end-position; it does not hold the load without live air pressure. For position holding, a SAIL or BSAI series cylinder is required.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X800-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 790 to 800 mm retraction point during product size transitions without swapping the physical cylinder.
Use the 10 mm rear stopper screw to fine-tune the retract end-point during initial commissioning, avoiding external stop blocks.
Handle long-travel material push-off tasks where a 40 mm bore provides sufficient force but exact positioning is critical.
The 10 mm adjustment is ideal for fine-tuning the end-of-stroke position during machine setup or product changeover, offering flexibility that a fixed-stroke SAI cylinder cannot. Because the 800 mm stroke is long, the 16 mm rod should be guided externally to prevent excessive side-load damage. This SKU uses a PT tapered G1/4 port, standard carbon steel rod, and no magnet. Mounting options are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2. It is dimensionally interchangeable per ISO 15552.
Quick checklist
The rear adjuster screw lets you shorten the effective travel from 800 mm down to 790 mm. It acts as a mechanical stop to fine-tune the end position and does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.