
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X800-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 800mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X800-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 700-800mm usable travel window from its 800mm nominal stroke. This design allows you to fine-tune the retract end-position at commissioning without adding external stops.
Unlike fixed-stroke alternatives, this model lets you dial in the exact travel limit during machine setup or product changeover. The rear adjuster acts purely as a travel stop and does not hold the load without live air pressure. It supports a 30-800 mm/s speed range and uses a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X800-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 700-800mm retract position when switching between product lengths on an automated line, avoiding physical cylinder swaps.
Set the precise push-back distance for different carton sizes without bolting on external stopper blocks or modifying the frame.
Fine-tune the end-of-stroke position during initial machine setup to align tooling perfectly, using the rear screw to trim up to 100mm.
An adjustable stroke is ideal for variable end-stops and product-size changeovers, whereas a fixed SAI cylinder locks you into one exact dimension. To replace an ISO 15552 cylinder, match the 40mm bore, 800mm stroke, 100mm adjustment, PT port thread, and your required mounting and magnet options.
Because the stroke is 800mm, the 16mm rod and M12x1.25 thread carry moderate side loads but still require an external guide to prevent rod binding over long unsupported travel. For load-holding without live air, select a SAIL or BSAI cylinder instead of this plain SAIJ model.
Quick checklist
At 0.7 MPa, the push force increases to 879N.
The rear adjuster screw lets you shorten the 800mm nominal stroke by up to 100mm, creating a 700-800mm travel window. It functions as a mechanical stop to set the end position, not a lock, and does not hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.