verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X800-30

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X800-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 800mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke800 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$139.55 $147.05Save 5% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X800-30

The AirTAC SAIJ40X800-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the travel window from 770 to 800 mm. The extruded aluminum barrel includes sensor grooves on both sides for straightforward detection setups.

This adjustable-stroke model allows you to dial in the retract end-position during commissioning without adding external stops. The rear screw acts purely as a travel stop and works alongside the 30 mm air cushions to decelerate the load; it does not hold the position without live air pressure. For load-holding requirements, consider the SAIL or BSAI series instead.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X800-30 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X800-30
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke800 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X800-30

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×800Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X800-30 Is Used

tune

Machine Changeovers

Dial in the retract position by up to 30 mm during product size transitions without physically replacing the cylinder or adding external mechanical stops.

conveyor_belt

Variable End Stops

Set precise downstream pushing distances on a conveyor line, adjusting the travel window between 770 and 800 mm to accommodate varying package dimensions.

precision_manufacturing

Commissioning Calibration

Fine-tune the final end-of-stroke position during initial machine setup to perfectly align tooling, utilizing the rear screw to overcome minor mechanical tolerances.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X800-30 the Right Cylinder?

Choose this 40 mm bore when you need more thrust than the 32 mm version (402 N at 0.5 MPa) but want to keep the physical footprint compact. The 30 mm adjustment range is ideal for machine setups requiring variable end-stops or product-size changeovers, avoiding the need to swap out a fixed-stroke SAI cylinder. When matching an ISO 15552 replacement, verify the 800 mm stroke, 30 mm adjustment, G1/4 port, and PT thread type.

With an 800 mm stroke, the unsupported rod length increases side-load risks. Even with a 16 mm rod and M12x1.25 thread providing decent rigidity, you should incorporate an external guide to prevent binding. The available mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X800-30 FAQ

The rear adjuster screw allows you to shorten the effective stroke by up to 30 mm, providing a usable travel window of 770 to 800 mm. This stopper sets the retract end-position and works with the 30 mm air cushion to decelerate the load, but it does not lock the position without continuous air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X800-30

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X800-30 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.