verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X800-40S

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X800-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 800mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke800 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$142.34 $149.84Save 5% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X800-40S

The AirTAC SAIJ40X800-40-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 800 mm stroke that can be fine-tuned backward by up to 40 mm, yielding a usable travel window of 760 to 800 mm.

This configuration includes a magnetic piston for position detection, operating seamlessly with AirTAC CMSE reed and DMSE electronic solid-state sensors housed in the dual-side barrel grooves. The M12x1.25 rod thread and 30 mm cushion strokes manage impact deceleration. The rear adjustment mechanism acts strictly as a travel stopper for product changeovers, meaning it does not lock or hold the load without continuous live air pressure.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X800-40S Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X800-40S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke800 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X800-40S

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×800Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X800-40S Is Used

precision_manufacturing

Product Changeover

Dial in the 760-800 mm travel window during machine setup to accommodate varying product lengths without disassembling the pneumatic circuit.

conveyor_belt

Variable End-Stop Positioning

Fine-tune the retract end-position on a long-stroke conveyor sorting mechanism to adapt to package dimensions on the fly.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X800-40S the Right Cylinder?

An adjustable stroke is selected over a fixed SAI cylinder to allow precise end-position tuning at commissioning without swapping hardware or adding external stops.

For load-holding without live pressure, this cylinder is insufficient because the rear adjuster and air cushions only decelerate travel; instead, utilize an external rod lock, a pilot-operated check valve, or explore AirTAC SAIL and BSAI series. To replace an ISO 15552 cylinder, match the 40 mm bore, 800 mm stroke, 40 mm adjustment, PT G1/4 port, and -S magnet. Because the 800 mm stroke is long and unsupported, an external guide is mandatory to prevent rod side-loading and premature wear.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X800-40S FAQ

The maximum push force is 1130 N at 0.9 MPa.

The rear adjuster acts as a mechanical stopper that allows you to shorten the effective stroke from 800 mm down to 760 mm. It is used for fine-tuning the end position at commissioning but does not lock or hold the load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X800-40S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X800-40S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.