
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X800-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 800mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X800-75 is a double-acting, double-rod ISO 15552 profile cylinder featuring an integrated rear stroke adjuster. By turning the external stopper screw, you can fine-tune the effective travel down by up to 75 mm, creating a usable stroke window of 725 to 800 mm without swapping the unit.
This adjustable configuration is ideal for equipment that requires precise end-position calibration during commissioning or frequent product-size changeovers. The extruded aluminum barrel includes sensor grooves on both sides, and the rear adjuster functions purely as a travel stop to set the retract position. It does not hold the load dynamically without live air pressure, so for dead-load holding you would need an external rod lock or a related type like the SAIL (air-released lock) or BSAI (clamp-lock).
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X800-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 725 to 800 mm retract position during product size changes without physically replacing the cylinder or adding external stopper blocks.
Fine-tune the exact end-of-stroke location during machine commissioning to absorb mechanical tolerances in long-travel assemblies.
The 75 mm adjustment range is particularly useful on long-stroke machinery where you need to dial in the exact retract distance during setup rather than relying on a fixed 800 mm SAI cylinder.
As a true ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 cylinders such as those from Festo or SMC, using the standard reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) without FB, CA, CB, or CR brackets. Because the 800 mm stroke is quite long, the 16 mm rod and M12x1.25 thread will still experience side-loading leverage; an external guide rail is strongly recommended to prevent rod binding. This SKU uses PT tapered ports and lacks a magnet, so position sensing requires external switch mounting or upgrading to an -S variant for CMSE reed or DMSE electronic sensors.
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 128 kgf.
The rear adjuster screw acts as a mechanical stop that shortens the retract stroke. For this SAIJ40X800-75 model, you can trim the nominal 800 mm stroke back by up to 75 mm, giving you an effective travel window of 725 to 800 mm.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.