
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X800-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 800mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X800-75-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 725 to 800 mm, allowing you to dial back the nominal 800 mm stroke by up to 75 mm during commissioning.
This variant includes a standard carbon steel rod and a -S magnet for position sensing with AirTAC CMSE reed or DMSE electronic switches. The extruded aluminum barrel integrates sensor grooves on both sides, and the rear adjuster acts purely as a mechanical stop for end-position tuning, not as a load-holding lock.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X800-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 725-800 mm travel window during line changeovers to accommodate new product lengths without physically swapping out the actuator.
Dial in the exact retract position on a long-stroke conveyor diverting mechanism, using the rear screw to set the precise 725 mm minimum stop.
Adjust the effective stroke up to 75 mm during initial machine commissioning to clear mechanical interference and dial in the exact end-of-stroke timing.
The 75 mm adjustment range is ideal for product changeovers, letting you fine-tune the retract end position without swapping the cylinder or adding external stops. Because the plain SAIJ does not hold position without live air, use an AirTAC SAIL or BSAI for fail-safe load holding.
For an exact ISO 15552 replacement match, specify a 40 mm bore, 800 mm stroke, 75 mm adjustment, PT tapered port thread, and the -S magnet option. As this cylinder features an 800 mm stroke, the 16 mm rod and M12x1.25 thread will still experience deflection under side loads; always guide the load externally to prevent rod binding.
Quick checklist
The rear mechanical adjuster allows you to shorten the effective travel from the nominal 800 mm down to 725 mm. This creates a 75 mm adjustable window for fine-tuning end positions without adding external stops, though it acts only as a travel stop and not a load lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.