verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X85-20S

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X85-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 85mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke85 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$73.27 $80.77Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X85-20S

The AirTAC SAIJ40X85-20-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 85 mm stroke with an integrated adjustment mechanism that allows you to shorten the effective travel by up to 20 mm, creating a highly flexible 65-85 mm usable window.

This adjustable-stroke design eliminates the need to swap cylinders or bolt on external stops during commissioning or product changeovers. The extruded aluminum barrel includes sensor grooves on both sides for direct mounting of CMSE reed or DMSE electronic switches. The rear adjuster acts purely as a travel stop to fine-tune the end position and does not lock or hold the load without live air pressure.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X85-20S Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X85-20S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke85 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X85-20S

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×85Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X85-20S Is Used

tune

Machine Changeover

Quickly dial in the 65-85 mm travel window during product size transitions without swapping out the entire cylinder.

precision_manufacturing

End-Stop Calibration

Fine-tune the retract end-position precisely during commissioning to perfect the physical contact point.

settings_input_component

Variable Positioning

Set custom retraction limits on the assembly line to accommodate multiple part heights on the same fixture.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X85-20S the Right Cylinder?

The 65-85 mm adjustable travel window is ideal for setups requiring variable end-stops without changing the cylinder. If your setup needs less force, the 32 mm bore offers 402 N at 0.5 MPa; for heavier loads, the 50 mm bore provides 982 N. Because this is an 85 mm stroke, side-load is minimal, but always ensure the M12x1.25 rod thread is properly aligned.

For ISO 15552 replacement matching, verify the 40 mm bore, 85 mm stroke, 20 mm adjustment range, PT port thread, and the -S magnet option. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. Remember that neither the rear adjuster nor the variable air cushions function as a brake; for load-holding without live air, select an SAIL or BSAI cylinder.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X85-20S FAQ

At 0.7 MPa, push increases to 879 N. The operational speed range for this 40 mm bore is 30-800 mm/s.

The rear adjuster screw lets you mechanically shorten the stroke by up to 20 mm, providing a usable travel window of 65-85 mm. It acts as a physical stop and does not hold the load without air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X85-20S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X85-20S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.