
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X85-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 85mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X85-30-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. By integrating an external adjustment screw, this model provides a usable travel window of 55 to 85 mm, allowing you to shorten the effective stroke by up to 30 mm without physically swapping the cylinder.
Because this is a profile cylinder with an extruded aluminum barrel, it features sensor grooves on both sides for easy switch placement. The included -S magnet works seamlessly with AirTAC CMSE reed and DMSE electronic solid-state sensors. The standard carbon steel rod and M12x1.25 thread provide reliable load transmission, while the 30 mm adjustable air cushions at both ends manage end-of-stroke deceleration.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X85-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 85 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×85 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 55-85 mm travel window during product size changeovers to set new end stops without swapping cylinders.
Trim up to 30 mm of rear stroke during initial machine setup to perfect timing and avoid mechanical collisions.
Achieve exact retraction points for multi-format production lines using the built-in rear stopper screw.
Choose this 40 mm bore adjustable-stroke cylinder when your application requires precise end-position tuning during commissioning or frequent product changeovers. It allows you to dial in the exact 55 to 85 mm travel distance on the machine, eliminating the need to bolt on external stops or maintain multiple fixed-stroke SAI cylinders for different part sizes.
When matching this cylinder for an ISO 15552 interchangeability replacement, verify the 85 mm nominal stroke, 30 mm adjustment range, PT tapered port thread, and the -S magnet option. The rear adjuster acts purely as a travel stop and relies on live air pressure—it does not function as a lock or brake. If the machine requires true fail-safe load holding without continuous air, consider the AirTAC SAIL pneumatic lock or BSAI clamp-lock series instead. Additionally, the SAIJ supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR brackets.
Quick checklist
It operates at speeds between 30 and 800 mm/s, supported by 30 mm adjustable air cushions at both ends.
The rear adjuster screw allows you to mechanically shorten the 85 mm nominal stroke by up to 30 mm, creating a usable travel window of 55 to 85 mm. This stopper only restricts the travel end and requires live air pressure; it does not lock or hold the load in place.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.