
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X85-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 85mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X85-40-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 45-85 mm from its 85 mm nominal stroke. This version includes a magnet for position sensing and uses a standard carbon steel rod.
The integrated rear stopper allows precise end-position tuning at commissioning without adding external stops. It supports AirTAC CMSE reed and DMSE electronic sensors, and uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) omitting FB and CA options. The rear adjuster acts only as a travel stop, not a load lock.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X85-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 85 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×85 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 45-85mm travel window during product size transitions without physically swapping the cylinder.
Fine-tune the retract stroke limit during commissioning to perfect tooling alignment.
Leverage the -S magnet with DMSE electronic sensors for precise position feedback in automated lines.
The 16mm rod and M12x1.25 thread handle side loads well, but always guide external weights. For an exact ISO 15552 replacement, match the 40mm bore, 85mm stroke, 40mm adjustment, PT tapered ports, and -S magnet.
Because the rear adjuster and air cushions only decelerate the load, this cylinder cannot hold position without live air. If your application requires fail-safe load holding, consider the SAIL or BSAI series instead.
Quick checklist
At 0.7 MPa, the push force increases to 879N.
The rear adjuster lets you shorten the 85mm nominal stroke by up to 40mm, creating a usable travel window of 45-85mm to fine-tune the end position without changing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.