
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X85-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 85mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X85-50 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 35 to 85 mm usable travel window. The extruded aluminum barrel includes dual sensor grooves for flexible switch placement.
Because the 50 mm adjustment range is large relative to the 85 mm nominal stroke, this model excels at rapid product changeovers without swapping hardware. The rear screw acts purely as a travel stop for end-position tuning and relies on the built-in air cushion for deceleration; it is not a lock and cannot hold loads without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X85-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 85 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×85 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 35 to 85 mm travel window on the fly to accommodate different package lengths on a packaging line without changing cylinders.
Fine-tune the retract end-position during initial setup to perfect the seating force of a 628 N assembly press.
Secure different thicknesses of material by adjusting the rear stopper, using the air cushion to smoothly decelerate the 16 mm rod.
The adjustable travel is ideal for machine setup where a fixed SAI cylinder would require external shims. To match this ISO 15552 footprint exactly, specify the 40 mm bore, 85 mm stroke, 50 mm adjustment, PT port thread, and standard carbon steel rod without a magnet. For load-holding without continuous air pressure, select a SAIL or BSAI variant instead of relying on the adjuster.
With an 85 mm stroke, side loading is minimal, but the 16 mm rod thread should still be paired with an external guide if the load is heavy or offset. The standard mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options.
Quick checklist
At 0.7 MPa, the push force increases to 879 N.
The rear adjuster screw allows you to trim the effective stroke back by up to 50 mm from the 85 mm nominal length, creating a 35 to 85 mm travel window. It functions as a physical stop for end-position tuning and is not a locking device.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.