
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X85-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 85mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X85-50-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 85 mm stroke that can be fine-tuned backward by up to 50 mm, creating a highly flexible 35-85 mm usable travel window for precise commissioning.
This variant includes a magnet for position sensing via CMSE reed or DMSE solid-state switches fitted into the dual-side sensor grooves. It uses a carbon steel rod with an M12x1.25 thread and PT tapered ports. The rear adjuster functions purely as a mechanical stop to set end-of-travel limits and must not be confused with a locking mechanism, as the cylinder cannot hold loads without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X85-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 85 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×85 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retraction point between 35 and 85 mm during machine commissioning without installing external physical stops.
Quickly adapt a packaging or handling line to new part dimensions by rotating the rear adjuster screw to shift the effective stroke.
Achieve precise end-of-stroke positioning for assembly tasks, leveraging the 30 mm air cushioning to soften the impact at the variable stop.
The generous 50 mm adjustment range is ideal for product changeovers, allowing you to dial in the exact 35-85 mm travel without swapping hardware or adding external stops.
For ISO 15552 interchangeability, match the 40 mm bore, 85 mm stroke, 50 mm adjustment, PT port thread, and the -S magnet option. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR. Because the stroke is under 300 mm, side-load concerns are minimal, though external guides are still recommended for heavy radial loads. For true load-holding without continuous air pressure, consider the SAIL or BSAI series instead.
Quick checklist
At the maximum 1.0 MPa pressure, it delivers up to 128 kgf.
The rear adjuster screw acts as a mechanical stop that trims the effective travel back from the 85 mm nominal stroke, providing a usable 35-85 mm window. It sets the end position but does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.