
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X85-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 85mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X85-75 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel down to a minimum of 10 mm, creating a highly versatile 10-85 mm usable window. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches, though this specific SKU is configured without a magnet.
This model uses a PT tapered G1/4 port and relies on adjustable air cushions at both ends to decelerate the piston within its 30-800 mm/s speed range. The rear adjustment screw acts purely as a mechanical stop for end-position tuning at commissioning; it is not a locking mechanism and will not hold a load without continuous live air pressure. For applications requiring true load-holding, a related SAIL or BSAI series cylinder would be required.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X85-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 85 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×85 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact end-of-stroke position during initial machine build or product changeover using the rear stopper, avoiding the need to machine custom spacer rings.
Adjust the travel window from 10 to 85 mm on the fly to accommodate different product sizes on a single handling line without changing the actuator.
The generous 75 mm adjustment range on an 85 mm nominal stroke is ideal for prototyping or product changeovers, allowing you to fine-tune the end stop without swapping the cylinder or adding external stops, unlike a fixed-stroke SAI model.
When replacing an ISO 15552 cylinder, match the 40 mm bore, 85 mm stroke, PT G1/4 port, and the SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Because the usable travel is quite short, side-loading risks are minimal, but always ensure the 16 mm rod is aligned to prevent premature seal wear. Remember that the rear adjuster only sets the travel end point and does not function as a brake.
Quick checklist
The rear adjuster screw allows you to mechanically shorten the stroke by up to 75 mm from the nominal 85 mm, giving an adjustable usable travel window of 10 to 85 mm. The adjuster acts as a physical stop and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.