
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X85-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 85mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X85-75-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. The integrated rear stopper provides a usable travel window of 10 to 85mm, allowing you to dial back the nominal 85mm stroke by up to 75mm during commissioning without swapping out the unit.
This SKU includes a standard magnet for CMSE reed and DMSE electronic sensors, housed within dual-side sensor grooves on the extruded aluminum barrel. It uses PT tapered ports sized G1/4 and a 16mm carbon steel rod with an M12x1.25 thread. The SAIJ mounting set omits FB, CA, CB, and CR options, supporting Basic, FA, LB, TC, FTC, TCM1, and TCM2 interfaces.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X85-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 85 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×85 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 10 to 85mm travel window during machine commissioning to accommodate varying material thicknesses without installing external physical stops.
Rapidly adjust the retract end-position on packaging lines when switching between different package sizes, minimizing downtime and avoiding cylinder removal.
Choose this adjustable model over a fixed-stroke SAI when your application demands frequent product-size changeovers or precise end-position tuning without adding external mechanical stops. Because the 85mm stroke is relatively short, side-loading is minimal, but always guide the load externally for lateral stability.
To match this cylinder for ISO 15552 replacement, specify: 40mm bore, 85mm nominal stroke, 75mm adjustment range, PT G1/4 ports, the reduced SAIJ mounting set, and a magnet (-S) for AirTAC CMSE/DMSE switches. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air pressure; for true load-holding, select an SAIL or BSAI series cylinder.
Quick checklist
The operational speed range is 30-800 mm/s.
The rear adjuster screw acts as a mechanical stop that lets you shorten the effective stroke from its 85mm nominal length down to as little as 10mm. It sets the retract end-position but does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.