
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X850-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 850mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X850-75 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel back by up to 75 mm. This yields a usable stroke window of 775 to 850 mm, letting you dial in the exact end position during commissioning without adding external stops. The extruded aluminum barrel includes sensor grooves on both sides for position feedback. It supports a reduced mounting subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. The variable air cushions at both ends manage deceleration, but the rear adjuster acts purely as a travel stop and does not hold the load without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X850-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 850 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×850 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 775 to 850 mm travel window during product-size changeovers without physically swapping the cylinder or bolting on new external stops.
Dial in the exact retract position on long-stroke machinery, using the 75 mm rear stopper screw to compensate for mechanical tolerances during commissioning.
Handle extended reach operations on automated lines, relying on the 850 mm nominal stroke while benefiting from the built-in adjustment for final positioning.
The adjustable stroke is ideal for machine setups requiring variable end stops or product-size changeovers, offering a 775 to 850 mm travel window instead of a fixed SAI cylinder. For any stroke of 850 mm, you must use an external guide rail to support the load and mitigate side-loading forces on the piston rod.\n\nWhen matching an ISO 15552 replacement, verify the 40 mm bore, 850 mm stroke, 75 mm adjustment range, G1/4 PT port, and the appropriate mounting bracket. Remember that neither the rear adjuster nor the air cushions function as a lock; if you need fail-safe load holding without live air, consider the AirTAC SAIL or BSAI series, or use an external pilot-operated check valve.
Quick checklist
The rear adjuster screw lets you shorten the nominal 850 mm stroke by up to 75 mm, providing a usable travel window of 775 to 850 mm. It acts as a mechanical stop to set the end position precisely during setup.
At 0.7 MPa, the push force increases to 879 N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.