verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X90-10

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X90-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 90mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke90 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$70.48 $77.98Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X90-10

The AirTAC SAIJ40X90-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that trims the effective travel. With a 90 mm nominal stroke and a 10 mm adjustment range, it provides an 80-90 mm usable travel window for precise end-position tuning at commissioning.

This model uses a standard carbon steel rod with PT tapered port threads (G1/4). The extruded aluminum barrel includes sensor grooves on both sides for CMSE or DMSE switches, though this SKU is specified without a magnet. The rear screw acts purely as a travel stop for deceleration and does not lock the load without live air pressure.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X90-10 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X90-10
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke90 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X90-10

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×90Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X90-10 Is Used

tune

Machine Setup Tuning

Dial in the exact 80-90 mm end position during commissioning to perfect a pushing motion without machining new hard stops.

settings_input_component

Product Changeover

Quickly adapt a packaging line to different carton sizes by adjusting the rear screw up to 10 mm on the fly.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X90-10 the Right Cylinder?

The 10 mm adjustable window is ideal for product changeovers on a line, letting you fine-tune the 90 mm stroke without swapping the cylinder or adding external stops. Because the standard SAIJ lacks an internal lock, use a SAIL or BSAI cylinder if you need to hold a load safely without continuous air pressure.

For an exact ISO 15552 replacement, match the 40 mm bore, 90 mm stroke, 10 mm adjustment, PT port threads, and the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). The 16 mm rod and M12x1.25 thread handle moderate side loads well, but any stroke over 300 mm requires an external guide.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X90-10 FAQ

The rear adjuster screw lets you shorten the 90 mm nominal stroke by up to 10 mm, creating an 80-90 mm travel window. This stopper only sets the end position and deceleration; it does not lock the load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X90-10

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X90-10 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.