
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X90-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 90mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X90-10-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster.
This unit includes a -S magnet for CMSE reed and DMSE electronic sensors, which seat neatly into the sensor grooves on both sides of the extruded aluminum barrel. The carbon steel rod uses an M12x1.25 thread, and the rear stopper acts purely as an end-position deceleration tool, not a load-holding lock.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X90-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 80 to 90 mm travel end-point during initial commissioning without fabricating custom external stoppers.
Quickly adapt the stroke length by up to 10 mm on automated lines handling slightly varying product sizes.
Fine-tune the retract end position for delicate pressing or clamping tasks where a fixed 90 mm stroke is insufficient.
Choose this 40 mm bore when an application requires precise end-position tuning without swapping cylinders or adding external stops on a machine changeover. For true load-holding without live air pressure, select an SAIL pneumatic lock or BSAI clamp-lock cylinder instead of relying on the adjuster.
When replacing an ISO 15552 cylinder, match the 40 mm bore, 90 mm stroke, 10 mm adjustment range, PT tapered port thread, and the -S magnet requirement. The SAIJ series supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR brackets.
Quick checklist
At 0.7 MPa, the push force increases to 879N.
The rear adjuster screw acts as a mechanical stop that lets you trim the effective travel back from the 90 mm nominal stroke down to 80 mm, creating an 80-90 mm usable window. It decelerates the travel end but does not lock or hold the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.