
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X90-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 90mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X90-30 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 90 mm travel that can be dialed back by up to 30 mm, giving technicians a 60-90 mm usable window to perfectly tune the retract end position without adding external stops.
This extruded aluminum barrel omits the FB, CA, CB and CR mounts, utilizing a reduced ISO 15552 mounting set of Basic, FA, LB, TC, FTC, TCM1 and TCM2. The rear adjuster acts purely as a travel stop for position tuning, not a load-holding lock, meaning live air is required to maintain force against the stopper.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X90-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance within the 60-90 mm window during machine commissioning to achieve precise positioning without swapping hardware.
Quickly adjust the cylinder's travel end to accommodate different part sizes on a manufacturing line, minimizing downtime between production runs.
Set custom stroke limits for delicate assembly operations where the standard 90 mm travel would apply too much force or overextend the mechanism.
An adjustable stroke is chosen over a fixed SAI cylinder when you need variable end-stops for rapid product changeovers or commissioning fine-tuning. To match this ISO 15552 replacement exactly, verify the 90 mm stroke, 30 mm adjustment range, PT G1/4 port, and the required mounting style. Because the stroke is under 300 mm, side-load stress on the 16 mm rod is minimal, though external guides are still recommended for heavy lateral loads.
Quick checklist
At 0.7 MPa, the push force increases to 879 N.
The rear adjuster screw allows you to shorten the nominal 90 mm stroke by up to 30 mm, creating a 60-90 mm adjustable travel window. This stopper sets the end position but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.