
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X90-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 90mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X90-30-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that permits a usable travel window of 60 to 90 mm. Equipped with a standard magnet, it directly supports AirTAC CMSE reed and DMSE solid-state sensors fitted into the dual-side extruded barrel grooves.
This adjustable variant omits the FB, CA, CB, and CR mounts, retaining a focused ISO 15552 mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2. The 16 mm carbon steel rod and M12x1.25 thread provide robust load handling, while the 30 mm adjustment range allows precise end-position tuning at commissioning without adding external stops.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X90-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 60-90 mm travel window during machine format changes, letting operators fine-tune the retract position without swapping out the entire actuator.
Use the rear adjusting screw to set precise retract limits for sensor probing or clamping tasks that require slight positional shifts on the fly.
Achieve exact end-of-stroke positioning during initial commissioning, using the 30 mm trim range to perfect part insertion depth without external shims.
If your setup needs less force, the 32 mm bore offers 563 N at the same pressure; for heavier payloads, the 50 mm bore provides 1374 N. The rear adjuster acts purely as a travel stop and cannot hold a load without live air pressure, so explore SAIL or BSAI variants if true mechanical load-holding is required.
When replacing an ISO 15552 cylinder, match the 40 mm bore, 90 mm nominal stroke, 30 mm adjustment range, PT port thread, and the required mounting accessory. Because the 90 mm stroke falls below the 300 mm threshold, side-load stress is minimal, but an external guide remains recommended for heavy lateral loads.
Quick checklist
At 0.7 MPa, the push force increases to 879 N.
The rear stopper screw allows you to trim the effective travel back by up to 30 mm from the 90 mm nominal stroke, creating a 60 to 90 mm usable travel window for fine-tuning end positions at commissioning.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.