verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X90-40

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X90-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 90mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke90 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$70.48 $77.98Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X90-40

The AirTAC SAIJ40X90-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that trims the 90 mm nominal travel back by up to 40 mm. This creates a 50-90 mm usable window, allowing you to dial in the exact end position during commissioning without swapping out the unit.

Equipped with a 16 mm carbon steel rod and M12x1.25 threading, it handles operational speeds of 30-800 mm/s. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches. This SAIJ variant supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR options.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X90-40 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X90-40
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke90 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X90-40

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×90Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X90-40 Is Used

tune

Machine Setup Commissioning

Dial in the exact 50-90 mm travel window during initial machine commissioning to perfect end-of-stroke positioning without adding external hard stops.

settings_input_component

Product Size Changeover

Quickly adapt the cylinder's effective stroke on packaging lines when product dimensions change, using the 40 mm rear adjustment screw to accommodate new sizes.

precision_manufacturing

Variable End-Stop Positioning

Fine-tune the retract end-position in light assembly operations where precise stroke endpoints are critical and standard fixed-stroke cylinders fall short.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X90-40 the Right Cylinder?

If you need less force, the 32 mm bore provides 402 N; for heavier loads, the 50 mm bore offers 982 N. The adjustable rear stopper is ideal for product changeovers on a line, whereas a fixed SAI cylinder is better for unchanging travel. Remember that the adjuster acts only as a travel stop and does not hold the load without live air pressure; for true load-holding, consider an SAIL or BSAI cylinder. This unit uses PT tapered ports and standard carbon steel rod material without a magnet.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X90-40 FAQ

The rear adjuster screw allows you to shorten the 90 mm nominal stroke by up to 40 mm, providing a usable travel window of 50-90 mm. It acts as a mechanical stop to fine-tune the end position and does not lock the load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X90-40

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X90-40 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.