
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X90-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 90mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X90-75 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel down to a 15-90 mm window. The extruded aluminum barrel includes sensor grooves on both sides for straightforward position feedback.
This model uses a 16 mm carbon steel piston rod with an M12x1.25 thread, paired with PT tapered ports and 30 mm variable air cushions at both ends. The rear adjustment screw functions purely as a mechanical stop to set the retract end position; it does not lock or hold the load without live air pressure. For applications requiring true load-holding, consider the SAIL or BSAI series.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X90-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 15-90 mm travel window on the fly during product size transitions without replacing the cylinder or adding external stopper blocks.
Use the rear adjuster to precisely set the retract position during commissioning, absorbing mechanical tolerances in the fixture.
Provides 628 N of clamping force at 0.5 MPa, with the adjustable stroke allowing variable material thicknesses to be pressed accurately.
The 75 mm adjustment range is exceptionally wide, allowing extreme fine-tuning of the 15-90 mm usable travel during machine setup or product changeover without swapping the cylinder. Because the stroke is under 300 mm, side-load stress on the 16 mm rod is minimal, though long unsupported loads should still use an external guide. It uses the standard SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR brackets. To match this ISO 15552 replacement, verify the 90 mm stroke, 75 mm adjuster, PT G1/4 port, and no magnet (-S).
Quick checklist
The operating speed ranges from 30-800 mm/s, supported by 30 mm air cushions at both ends.
The rear adjuster acts as a mechanical stop that shortens the nominal 90 mm stroke, creating a 15-90 mm usable travel window. It only sets the end position and does not hold the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.