
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X90-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 90mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X90-75-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. With a nominal 90mm stroke and a 75mm adjustment range, you can dial back the effective travel to a precise 15-90mm window without swapping hardware.
This adjustable-stroke design allows fine end-position tuning directly at commissioning or during product-size changeovers. The barrel is extruded aluminum with sensor grooves on both sides, and this -S variant includes a magnet for CMSE reed and DMSE electronic sensors. The standard carbon steel rod and M12x1.25 thread provide robust performance, while the PT tapered ports ensure a tight pneumatic seal.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X90-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 15-90mm travel window during product-size changeovers to set new end positions without physically swapping the cylinder or adding external stops.
Adjust the stroke on the fly for conveyor sorting arms or diverter mechanisms that need to hit multiple specific positions within the 90mm range.
The adjustable stroke is ideal for variable end stops, letting you fine-tune the travel window from 15 to 90mm on the fly instead of installing a fixed-stroke SAI cylinder.
Remember that the rear adjuster acts as a mechanical stop to decelerate the travel end, not as a lock. A plain SAIJ cylinder does not hold its load without live air pressure. For true fail-safe load holding, consider the SAIL air-released lock or BSAI clamp-lock series. This model uses the reduced SAIJ mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). It is dimensionally interchangeable per ISO 15552.
Quick checklist
The rear adjusting screw acts as a mechanical stopper that lets you shorten the effective stroke by up to 75mm. This creates a usable travel window of 15-90mm, allowing you to fine-tune the retract end position without changing the cylinder.
At 0.7 MPa, the push force increases to 879N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.