
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X95-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 95mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X95-10-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 95 mm stroke that can be fine-tuned down by up to 10 mm, giving you a precise 85 to 95 mm usable travel window during commissioning.
This variant features a standard carbon steel rod and PT tapered port threads. The -S designation means it includes a magnet for position sensing, working seamlessly with AirTAC CMSE reed and DMSE electronic switches mounted into the dual-side sensor grooves on the extruded aluminum barrel.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X95-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 85-95 mm stroke window during product size changes without swapping out the entire cylinder or repositioning hard stops.
Fine-tune the retract distance at commissioning to perfect part seating or clamping pressure using the rear adjustment screw.
Achieve precise variable end stops for automated pressing or inserting tasks where a fixed 95 mm stroke might overshoot components.
Select this 40 mm bore cylinder when an application requires exact end-position tuning without adding external stopper hardware; the rear screw lets you dial in the 85-95 mm travel window on the fly. If your setup needs less force, stepping down to a 32 mm bore yields 563 N at 0.7 MPa, while moving up to a 50 mm bore provides 1374 N. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air—if load holding is required upon pressure loss, consider an external rod lock or the SAIL series.
For an exact ISO 15552 replacement, match the 40 mm bore, 95 mm stroke, 10 mm adjustment, PT port thread, and -S magnet. Because this is a profile cylinder, it utilizes a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR options.
Quick checklist
The rear adjuster screw allows you to shorten the effective travel by up to 10 mm. This creates a usable stroke window of 85 to 95 mm, letting you fine-tune the end position at commissioning without changing the cylinder.
At a maximum 1.0 MPa operating pressure, it can deliver up to 128 kgf.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.