
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X95-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 95mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X95-20 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear mechanical stroke adjuster. It provides a nominal 95 mm stroke that can be dialed back by up to 20 mm, creating a precise 75-95 mm usable travel window for fine-tuning end positions without adding external stops.
This extruded aluminum profile cylinder includes variable air cushions at both ends to manage deceleration. Mounting options are restricted to Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR styles. The rear adjuster acts solely as a travel stop and does not hold the load without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X95-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 75-95 mm travel window during product size changes to set new retract endpoints without physically swapping the actuator.
Fine-tune the exact end-stop for a pressing or clamping station at commissioning, ensuring precise contact without external mechanical stops.
Adjust the retract distance on the fly to accommodate different package widths on a conveyor line, using the rear screw to set the exact travel limit.
If your setup demands less force, stepping down to a 32 mm bore yields 402 N; stepping up to a 50 mm bore provides 982 N. Choose this adjustable SAIJ over a fixed SAI when product sizes vary on the line and you need a variable end-stop rather than swapping cylinders.
To match this exact configuration for an ISO 15552 replacement, specify a 40 mm bore, 95 mm stroke, 20 mm adjustment range, PT port thread, and standard carbon steel rod without a magnet. Since the stroke is under 300 mm, side-load stress is minimal, but always ensure the 16 mm rod and M12x1.25 rod thread are properly aligned to prevent binding.
Quick checklist
At 0.7 MPa, the push force increases to 879 N.
The rear adjuster screw allows you to shorten the effective travel from the nominal 95 mm down to 75 mm. This stopper only sets the end position and must not be used to hold a load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.