
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X95-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 95mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X95-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 55 to 95 mm, allowing you to dial back the 95 mm nominal stroke by up to 40 mm during machine commissioning.
This model features a 16 mm carbon steel rod with an M12x1.25 thread, paired with 30 mm air cushions at both ends to manage end-of-stroke impact. The extruded aluminum barrel includes sensor grooves on both sides for fitting CMSE reed or DMSE electronic switches if position feedback is later required. It uses a PT tapered port thread and operates at speeds between 30 and 800 mm/s.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X95-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact end-of-stroke position within the 55-95 mm window during initial commissioning to avoid machining custom external stopper blocks.
Quickly reconfigure the cylinder's extend travel on a packaging line when transitioning to a different product size, minimizing downtime between batches.
Use the 40 mm rear adjustment screw to safely shorten the effective stroke, preventing the tooling from over-traveling into sensitive workpiece areas.
Choose this 40 mm bore adjustable-stroke cylinder when your application requires precise end-position tuning without swapping out physical components. Because the stroke is under 300 mm, side-load stress on the piston rod is moderate, though external guides are still recommended for heavy radial loads.
The rear adjuster screw acts purely as a travel stop and does not lock the load mechanically. If your application requires position holding without continuous live air pressure, you must integrate an external rod lock or pilot-operated check valve, or select a related AirTAC series like the SAIL (air-released lock) or BSAI (clamp-lock). To match this ISO 15552 interchangeable unit, specify: 40 mm bore, 95 mm stroke, 40 mm adjustment, PT port thread, standard carbon steel rod, and no magnet.
Quick checklist
The rear adjuster screw lets you mechanically shorten the 95 mm nominal stroke by up to 40 mm, providing an effective travel range of 55 to 95 mm. It acts as a physical stop and does not function as a lock to hold the load without air pressure.
At the maximum operating pressure of 1.0 MPa, it achieves 128 kgf.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.