
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X95-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 95mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X95-40-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the nominal 95 mm travel by up to 40 mm. This yields a usable stroke window of 55 to 95 mm, allowing precise end-position tuning at commissioning without swapping out the cylinder or adding external stops.
This variant includes a standard carbon steel rod and a PT tapered port thread. Because it carries the -S magnet option, it directly supports AirTAC CMSE reed and DMSE electronic sensors via the dual-side sensor grooves on its extruded aluminum barrel. The rear adjuster acts purely as a travel stop for deceleration alongside the adjustable air cushions, so it will not hold a load without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X95-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 55-95 mm travel window during product size changeovers without physically swapping cylinders or adding external stopper blocks.
Fine-tune the retract end-position during machine commissioning to perfect pressing or clamping depth on the fly.
Leverage the -S magnet with DMSE electronic sensors in the dual-side grooves for precise position feedback in automated lines.
The 40 mm adjustment range on a 95 mm stroke is ideal for machines that require frequent product changeovers, letting operators fine-tune the retract end-stop on the fly. If your process requires true load-holding without continuous air pressure, a standard SAIJ is insufficient; you should step up to an SAIL pneumatic lock or BSAI clamp-lock cylinder instead.
To match this ISO 15552 interchangeable cylinder for a replacement, verify the 40 mm bore, 95 mm stroke, PT port thread, and the -S magnet option. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR styles. Since the 95 mm stroke is under 300 mm, side-load stress on the M12x1.25 rod thread is minimal, though external guides are still recommended for heavy lateral loads.
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 128 kgf.
The rear adjuster screw allows you to shorten the 95 mm nominal stroke by up to 40 mm, creating a usable travel window of 55 to 95 mm. This acts as a mechanical stop to fine-tune the end position and does not lock or hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.