
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X95-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 95mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X95-50 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 45 to 95 mm, allowing you to dial back the nominal 95 mm stroke by up to 50 mm.
This extruded aluminum barrel design includes sensor grooves on both sides for CMSE or DMSE switches. The PT tapered port is G1/4, and the 16 mm carbon steel rod with an M12x1.25 thread handles side loads well. The rear stopper acts only as a travel end, so you need live air to maintain position.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X95-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 45-95 mm end-stop during product size transitions on a packaging line without swapping the cylinder.
Fine-tune the retract stroke during setup to ensure precise pressing or clamping depth on varying component heights.
Trim the travel back by up to 50 mm on-site to align tooling perfectly, avoiding the need to machine custom spacers.
Choose this adjustable model over a fixed SAI when you need to fine-tune the end position during commissioning or product changeover without adding external stops. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB and CA options. Because the rear adjuster is a stop and not a lock, use SAIL or BSAI for load-holding without air pressure.
Quick checklist
The rear adjuster screw lets you shorten the 95 mm nominal stroke by up to 50 mm, creating a 45 to 95 mm usable travel window. It acts as a physical stop to set the end position and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.