
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X95-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 95mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X95-75 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. By turning the rear stopper screw, you can trim the effective stroke by up to 75 mm during commissioning without swapping the cylinder or adding external stops.
This 40mm bore unit uses a G1/4 port and a 16mm carbon steel rod with an M12x1.25 thread, offering robust resistance to side loading. It features variable air cushions at both ends to decelerate the piston smoothly. The adjuster acts purely as a mechanical stop to set the end position; it does not lock the load, so an external rod lock or SAIL cylinder is required for load-holding without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X95-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 20-95mm travel window during product size changes without swapping hardware or adding external shims.
Fine-tune the retract position of sorting gates on the fly to handle varying package lengths on a packaging line.
Set precise mechanical end limits during machine commissioning, using the 75mm rear screw to perfect the working stroke.
Choose this 40mm bore cylinder when you need 628N of pull force at 0.5 MPa and highly flexible end-position tuning. If your application requires less force, stepping down to a 32mm bore yields 345N of pull force, while stepping up to a 50mm bore provides 825N. The SAIJ40X95-75 is ideal for product-size changeovers on a packaging line, allowing operators to dial in the exact 20-95mm travel distance on the fly instead of fabricating custom spacers.
For a direct ISO 15552 replacement match, ensure you specify the 40mm bore, 95mm nominal stroke, 75mm adjustment range, PT tapered port thread, and carbon steel rod. Because this is a non-magnet model, it will not work with CMSE or DMSE sensors without adding the -S magnet option. The standard SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR brackets.
Quick checklist
At 0.7 MPa, the push force increases to 879N.
The rear adjuster screw allows you to mechanically shorten the 95mm nominal stroke by up to 75mm, creating a usable travel window of 20 to 95mm. This stopper sets the end position but does not hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.