
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X95-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 95mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X95-75-S is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. The integrated -S magnet enables position feedback via CMSE reed or DMSE electronic sensors.
This specific SKU provides a wide usable travel window from 20 to 95 mm. The 75 mm adjustment range allows you to dial back the nominal 95 mm stroke significantly at commissioning without swapping hardware. It features a carbon steel rod and PT tapered ports, while the extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X95-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 20-95 mm travel window during line changeovers to accommodate new product lengths without physically replacing the cylinder.
Adjust the retract position on the fly to handle different package sizes on a sorting conveyor without adding external hard stops.
Dial in the exact 40 mm bore thrust and end-stop location during machine commissioning to prevent mechanical binding or over-travel.
Choose this 40 mm bore cylinder when a process requires variable end-stops or frequent product-size changeovers. Instead of maintaining an inventory of multiple fixed-stroke SAI cylinders, this single unit adapts on the fly. If your application demands less force, stepping down to a 32 mm bore yields 563N at 0.7 MPa; for heavier loads, a 50 mm bore provides 1374N.
The rear adjuster acts purely as a mechanical stop to tune the travel end and relies on the built-in air cushion for deceleration. It does not hold the load without live air pressure. For dead-stop or load-holding requirements, consider an external rod lock, an SAIL air-released lock, or a BSAI clamp-lock cylinder. To match this replacement, verify the 40 mm bore, 95 mm stroke, 75 mm adjustment, PT ports, and the -S magnet option.
Quick checklist
The rear adjuster screw acts as an external stopper, allowing you to shorten the effective 95 mm stroke by up to 75 mm. This creates a usable travel window of 20 to 95 mm for precise end-position tuning without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.