
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X950-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 950mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X950-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 940-950 mm usable travel window, allowing you to dial back the 950 mm nominal stroke by up to 10 mm during commissioning. Built with a carbon steel rod and a PT tapered port, it delivers 628 N of pull force at 0.5 MPa.
This adjustable-stroke model uses an external rear stopper to fine-tune the retract end position without swapping the cylinder or adding external stops. It features variable air cushions at both ends and extruded aluminum barrel sensor grooves on two sides. The adjuster acts purely as a travel stop and does not hold the load without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X950-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 950 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×950 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position on a 950 mm stroke assembly by trimming up to 10 mm at the rear stopper, ensuring precise alignment without external shims.
Adapt the cylinder's extended reach quickly during product size changes on a line, using the built-in adjuster rather than replacing the entire actuator.
Set accurate end-stops for pushing or lifting materials on a conveyor belt, leveraging the 628 N pull force and variable air cushions for smooth deceleration.
Choose this 40 mm bore cylinder when your setup requires exact end-position tuning on a long 950 mm stroke. The 16 mm rod and M12x1.25 thread handle moderate side loads, but because the stroke is 950 mm, an external guide is recommended to prevent rod sag. If your application needs less force, stepping down to a 32 mm bore yields 345 N of pull force at 0.5 MPa.
For load-holding without continuous air pressure, select a SAIL (air-released lock) or BSAI (clamp-lock) cylinder instead of relying on the SAIJ rear stopper. This SAIJ model is dimensionally interchangeable per ISO 15552 and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts.
Quick checklist
The rear adjuster acts as a mechanical stop that lets you shorten the effective travel from 950 mm down to 940 mm. It is used for fine-tuning end positions at commissioning but does not lock or hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.