verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X950-100S

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X950-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 950mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke950 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$163.27 $170.77Save 4% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X950-100S

The AirTAC SAIJ40X950-100-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 850-950 mm usable travel window, allowing you to dial back the 950 mm nominal stroke by up to 100 mm during commissioning without adding external stops.

This unit includes a standard -S magnet for position sensing with AirTAC CMSE reed and DMSE electronic switches, which mount directly into the dual-side sensor grooves on the extruded aluminum barrel. It uses a PT tapered G1/4 port and a 16 mm carbon steel rod with an M12x1.25 thread. The adjustable rear stopper sets the end position but does not lock the load; for dead-air holding, consider an external rod lock or the SAIL series.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X950-100S Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X950-100S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke950 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X950-100S

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×950Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X950-100S Is Used

settings_input_component

Variable End-Stop Setup

Dial in the exact retract distance between 850 and 950 mm during machine commissioning to accommodate different material lengths without swapping cylinders.

conveyor_belt

Product Changeover

Quickly adjust the stroke stop on packaging lines when product sizes change, minimizing downtime and avoiding the need for external mechanical stops.

precision_manufacturing

Long-Stroke Positioning

Fine-tune the end-of-travel position on extended 950 mm movements where precise end-location matters more than absolute maximum extension.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X950-100S the Right Cylinder?

Choose this 40 mm bore adjustable cylinder when an application requires variable end-stops or product changeover tuning, rather than a fixed-stroke SAI cylinder.

Because the 950 mm stroke is long, the 16 mm rod requires an external guide to prevent excessive side-loading and buckling. This SAIJ configuration uses a PT port thread, carbon steel rod, and the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting the FB, CA, CB, and CR mounts. It is dimensionally interchangeable per ISO 15552.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X950-100S FAQ

The rear adjuster screw allows you to shorten the 950 mm nominal stroke by up to 100 mm, creating a usable travel window of 850 to 950 mm. This stopper decelerates the travel end but does not lock the load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X950-100S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X950-100S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.